Jobs With Visa

Welder Jobs in Greece with Visa Sponsorship 2026

Welder jobs in Greece with visa sponsorship 2026 are real under the new Type E.4 single permit — the same employer-led route created by Law 5275/2026 that covers plumbers and carpenters this season. The employer starts the process with a contract of at least six months, and the permit runs for three years. This guide gives you the route, the wage floor and the hubs where demand is real.

Check Welder Jobs in Germany with Visa Sponsorship 2026 for the comparison.

What Welders Do in Greece — MIG/MAG, TIG, Arc Welding and Fabrication

Welders in Greece work on MIG/MAG, TIG and arc welding and on metal fabrication in shipbuilding and repair, metal fabrication and construction. Demand is real around Athens and Piraeus, Thessaloniki, Patras and the Perama shipyard corridors, where shipyards, fabrication shops and construction contractors need qualified welders rather than general metal helpers.

A general metal helper is not a welder: the job needs documented welding training, certification and experience, and employers check it before they start a permit. Check the exact duties in the job offer — coded welding, structural welding and fabrication are welder work, while grinding, carrying and site cleaning are not. Keep your welding certificates and test records ready before you apply.

The Type E.4 Single Permit — Employer-Led, Six-Month Contract, Three Years

The route is the Type E.4 single permit under Law 5275/2026 (FEK 17/A, 6 February 2026), which rewrote the Greek system into one combined residence and work permit. The employer leads the process (metaklisi) with a contract of at least six months — down from twelve — and the permit is issued for three years, then renewed in five-year blocks. The statutory decision takes 90 days, with 30 more possible, and the employer pays a €200 invitation fee per worker.

The route is quota-bound by an annual Cabinet decision keyed to ESCO codes: the 2026 quota is about 94,240 places, concentrated in agriculture, manufacturing, construction, tourism and care, and construction and manufacturing are among the quota-concentrated sectors. A worker may begin work once the single-permit application is submitted, with a certificate of submission issued, without waiting for the physical card.

Check Welder Jobs in Uk with Visa Sponsorship 2026 for the comparison.

Pay — €920 a Month Minimum Wage, No Welder Band Verified Yet

Greece’s minimum wage is €920 a month gross from 1 April 2026 under Ministerial Decision 8934/2026, and no contract may pay below it. No welder-specific pay band was verified at write time, so this post prints no welder salary figure: confirm the exact monthly figure in the written contract before you sign, and treat any number quoted by an aggregator as unverified until the employer puts it in writing.

Experience, the welding process, the employer, overtime and the location all move the final figure, and Athens and Piraeus pay differently from smaller towns. Ask whether the quoted figure is gross or net, what overtime and shift allowances are paid, and whether the contract is for shipyard, fabrication or site work, so two offers can be compared fairly.

What the Employer Must Do — Invitation, Contract and the 90-Day Decision

The employer starts the process: the invitation, the contract of at least six months and the single-permit application, with the €200 fee per worker. The permit ties the worker to the sponsoring employer for six months, after which a change is possible with notification. Keep copies of every document the employer files, including the certificate of submission that lets you start work.

Because the route is quota-bound, ask the employer to confirm that a quota place is available for your trade before you resign from a current job or pay for travel. The decision is statutory at 90 days with 30 more possible, so plan the timeline with the employer and do not book non-refundable travel until the permit is issued.

How to Apply for Welder Jobs in Greece with Visa Sponsorship 2026

The route is: get a job offer with a contract of at least six months from a Greek employer, the employer files the invitation and the Type E.4 application, you apply at the Greek consulate once the invitation is approved, and the three-year permit follows. The decision takes up to 90 days, so plan the timeline with the employer.

No live sponsored welder advert was verified at write time, so this post carries no Apply Now link. Never pay a broker for a job offer or a visa, and confirm the employer, the contract and the pay in writing before any money changes hands. Ask the employer to put the welding process, overtime and the exact monthly figure in the written contract.

Check Welder Jobs in Spain with Visa Sponsorship 2026 for the comparison.

Frequently Asked Questions

What is the Type E.4 single permit in Greece?

The Type E.4 single permit, created by Law 5275/2026, combines residence and work in one permit. It is employer-led: the employer files the invitation and the application with a contract of at least six months, pays a €200 fee per worker, and the permit is issued for three years, then renewed in five-year blocks. The statutory decision takes 90 days, with 30 more possible.

What is the minimum wage for welders in Greece in 2026?

The Greek minimum wage is €920 a month gross from 1 April 2026 under Ministerial Decision 8934/2026, and no contract may pay below it. No welder-specific pay band was verified at write time, so confirm the exact monthly figure in the written contract before you sign.

Can I start work before the permit card arrives?

Yes. A worker may begin work once the single-permit application is submitted, with a certificate of submission issued, without waiting for the physical card. Keep that certificate safe — it is your proof that you are allowed to work while the card is processed.

How long am I tied to the sponsoring employer?

The permit ties you to the sponsoring employer for six months, after which a change of employer is possible with notification. Ask the employer to confirm the quota place and the contract terms in writing before you travel.

Check Chef Jobs in Greece with Visa Sponsorship 2026 for the comparison.

Welder jobs in Greece with visa sponsorship 2026 are real through the Type E.4 single permit — an employer-led route with a six-month contract, a three-year permit, a 90-day decision and a €200 invitation fee, inside a 2026 quota of about 94,240 places. The wage floor is €920 a month gross, and no welder-specific pay band was verified at write time. Get the contract, confirm the quota place, and never pay for the job.

Check Farm Worker Jobs in Greece with Visa Sponsorship 2026 for the comparison.

Balisha Rao

Balisha Rao is a contributor at SeasonalWorkVisa.com, dedicated to helping job seekers find the latest seasonal and work visa opportunities around the globe. With a keen eye for reliable updates and career resources, Balisha shares practical insights to guide readers toward the right opportunities. Passionate about connecting people with meaningful work experiences, she ensures every post is clear, useful, and easy to follow.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button